I Have a Northstate Plex Box

  1. To WALL (Video In) Connect to wall if a coax wall port is provided.
  2. To TV (Video Out) Connect to TV. You must set the channel on your TV to the channel designated by your service provider (usually channel 3). Contact your service provider for the channel information
  3. Network Connect to the Ethernet (CAT-5) network at your home, if applicable
  4. YPbPr Connect the receiver to the component video input (YPbPr) on the HDTV. See pages 13 and 14 for more information
  5. S-Video Connect an S-Video cable to send an S-Video signal to your TV, VCR, or DVD recorder. This signal is standard-defi nition but higher quality than other standard-defi nition TV connections.
  6. Video Out Connect to composite input on your HDTV or SDTV
    1. Note: Two video output connectors are provided. Typically, one output is connected to the TV, and the other output is used to connect to a
  7. home theater system, DVD recorder, or VCR
  8. Audio Out (L/R) Connect RCA-type cables to Audio Out to send analog audio signals (left and right) to a TV with stereo inputs or to a stereo amplifi er
    1. Note: Two sets of audio out connectors are provided. Typically, one set of outputs is connected to the TV, and the other set is used to connect to a home theater system, DVD recorder, or VCR
  9. Optical Connect an optical cable to send a digital audio signal to a surroundsound receiver or other digital audio device
  10. HDMI Connect an HDTV HDMI‚ĄĘ (High-Defi nition Multimedia Interface) cable¬†from the HDTV to the HDMI port. HDMI supports both digital audio and¬†video.
  11. USB Port USB connector. (Reserved for future use)
  12. Power Connect the DC output of the AC power adapter (provided) to deliver
  13. power to the receiver
    1. Note: This illustration may vary from the actual product.

Northstate plex box